Traction 4210 4wd won't stay engaged

   / 4210 4wd won't stay engaged #1  

wallace1

New member
Joined
Apr 17, 2012
Messages
2
Location
Aylesford NS
Tractor
John Deere 4210 HST
I have a 1999 JD 4210 HST which for some reason has started to jump out of 4wd. It engages but as soon as you drive away it jumps out but trys to engage again. Any common problems which would cause this? Thanks
 
Last edited:
   / 4210 4wd won't stay engaged #2  
:welcome:

Have you checked the linkage?

Have you been able to watch the cylinder to see if it moves to engage and stays there, or that it is what is shifting back and forth to cause the problem?
Here is the theory of the MFWD operation. Checking that the dash light stays lit (or not) when it is shifting back and forth may be a clue to the problem.
 

Attachments

  • 4210_MFWD.JPG
    4210_MFWD.JPG
    98.8 KB · Views: 186
Last edited:
   / 4210 4wd won't stay engaged
  • Thread Starter
#3  
Thanks for the info. I had a look and it is engaging and the light is on but when you start moving there is a bang and it jumps,would it be the spline shaft worn and it is jumping under strain. it is really bad on hard lock?
 
   / 4210 4wd won't stay engaged #4  
Could be, but don't know.

Do you have, or can you get, a copy of the tech manual to review the parts?

If not, I'd get it to a Deere mechanic before using it in MFWD. Need to determine if there is a problem forward or aft of the drive shaft to the front wheels, IMO.
 

Tractor & Equipment Auctions

Drill Bit attachment (A50322)
Drill Bit...
2007 Case IH 8010 4WD Combine (A50657)
2007 Case IH 8010...
2011 TROXELL 140BBL TRI AXLE VACUUM TRAILER (A50854)
2011 TROXELL...
48ft Low Boy T/A Trailer (A49346)
48ft Low Boy T/A...
2014 KENWORTH W900 MID-ROOF SLEEPER (A50854)
2014 KENWORTH W900...
2012 KENWORTH T800 SLEEPER (A50854)
2012 KENWORTH T800...
 
Top