jgbanshee
Gold Member
- Joined
- Sep 16, 2004
- Messages
- 316
- Location
- PA
- Tractor
- JD 310SE, 4300, 5300, 5210, 450 Crawler, CAT D3B, Ford 2N, 5000, 4000su, 3610, 345C, 340B, 1100
Every time I pull out in Forward with my JD 4300 the tractor jurks. When I select reverse and let out on the clutch, it moves fine with no jurks. I did adjust the linkage for the SyncRev lever down on the right hand side near the clutch. I adjusted it in favor of the forward position. Sometimes when I want to move forward the clutch seems not to be grabbing. If I tap the clutch pedal with my foot it usually will then grab and move the tractor. Reverse never has a problem so I am guessing (hoping) that the clutch is not the problem.
