460 loader cylinder seal replacement
- Thread starter Joebrown
- Start date
- Views: 5341
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,512
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Welcome to TBN
Browse the JD parts for the cylinders that are on the 460 loader.
Post pics of where you are getting stumped. From reading TBN, all cylinders are not the same. Some have a wire to work out for taking apart, and then thread in to secure. Maybe yours do, and maybe not.
Pics will help get you some answers.
Browse the JD parts for the cylinders that are on the 460 loader.
Post pics of where you are getting stumped. From reading TBN, all cylinders are not the same. Some have a wire to work out for taking apart, and then thread in to secure. Maybe yours do, and maybe not.
Pics will help get you some answers.
And where might I find the wire? Lol. Just has a 3/8” hole for a spanner wrench. Got it turning but just turning. Not backing out as if it is threaded in. Pics coming, thanks.
kennyd
Advertiser
This video should help:
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,512
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Here is another video that is a bit smoother in presentation and technique. Combined they add up well.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,512
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Joe
Tell us about the wire.. and add some pics of where you located it. Must be a bit different in the videos.
Here is one specific for the 460 loader.
Tell us about the wire.. and add some pics of where you located it. Must be a bit different in the videos.
Here is one specific for the 460 loader.
Last edited:
