4610 draft control doesn't work

   / 4610 draft control doesn't work #1  

gonefishin1

Member
Joined
Aug 17, 2014
Messages
37
Location
East texas
Tractor
ford 4610, ford 2120, ts254 (Chinese)
About a year or two ago my draft stopped working completely. If I move it up the lift doesn't do anything. I haven't taken anything apart yet, because I'm not really sure how all that works.

Has anyone seen this happen before?

Now my position control is getting to where it will not stay where I put it. If I raise it all the way up within 30 seconds it's moved and whatever I have picked up on the 3 point is dragging the ground. The more weight I have picked up the worse it seems to be.

Do you think these problems are related?
thanks for any help
 
   / 4610 draft control doesn't work #2  
I am not sure about the draft other than there is a linkage problem under the 3pt top cover. The leaking down of the hitch is probably the lift cylinder seal is worn out. Both require removing the top cover to repair.
 

Tractor & Equipment Auctions

KUBOTA KX161-3S2 EXCAVATOR (A50458)
KUBOTA KX161-3S2...
3-Point Water Well Drill w/Drill Pipe (A50860)
3-Point Water Well...
UNUSED 10PCS 3.9 in. Polyester Lifting Strap (A50860)
UNUSED 10PCS 3.9...
8 Yard Commercial Dumpster (A49346)
8 Yard Commercial...
2019 CATERPILLAR D6N LGP CRAWLER DOZER (A50458)
2019 CATERPILLAR...
UNUSED SWICT 72" SKID STEER QUICK ATTACH BUCKET (A50460)
UNUSED SWICT 72"...
 
Top