3-Point Hitch 4x20 hydraulic spool change out

   / 4x20 hydraulic spool change out #1  

jloven

Bronze Member
Joined
Sep 28, 2009
Messages
79
Location
Marshall, NC
Tractor
2013 John Deere 4720, 2014 New Holland T5.115, 2017 JD 4066R cab
I wanted to see if anyone had any advice or experience in replacing a 3 spool valve with a 4 spool valve? I have a 2007 cab 4720 and seem to have plenty of room to remove the current 3 spool valve and add a 4 spool valve like this one (FPS 4:)398 L239 4 Position Manual Hydraulic Spool Valve, New | eBay)

I feel confident about getting a second hydraulic control handle in the cab along with the linkage to control the 4th SCV. I can mount the 4th SCV on the back easily enough. I am just unsure of how the fitment of the larger spool valve will fit / connect to the tractor....Any suggestions or ideas?

Thanks
 
   / 4x20 hydraulic spool change out #2  
The replacement valve has to match your hydraulics open center system AND your hydraulic system flow, which is 12 GPM.
The valve you linked to appears to be a closed center valve.
 

Tractor & Equipment Auctions

2008 Ford F-250 Reading Service Truck (A50323)
2008 Ford F-250...
WEATHERFORD MP-10 TRIPLEX MUD PUMP POWERED BY A CATERPILLAR 3412 ENGINE (A50854)
WEATHERFORD MP-10...
2016 J&M 1122-20T X-Tended Grain Cart (A50657)
2016 J&M 1122-20T...
(2) ROLLS OF HD CHAIN LINK MESH WIRE (A50460)
(2) ROLLS OF HD...
2014 UTILITY 53X102 DRY VAN TRAILER (A50046)
2014 UTILITY...
2009 L3 GENERATOR SET (A51222)
2009 L3 GENERATOR...
 
Top