After seeing Mossroads video clips etc.and lurking on the sidelines for months I purchased my 425 with 4in1 bucket,minihoe,forks,brushog and 48" mower to maintain my 1 1/2 open acres and 5 1/2 acres of woods.Today I finally decided to figure out how to post a message and will start off with a question.I am hoping to change my hyd filter today (50 hr has come quick) -can't remember where to hookup the bleeder hose--on the top of pump couple of inches from the Tow valve or the side near the "Charge Pressure point"??
50 hr service
- Thread starter joeym
- Start date
- Views: 655
SnowRidge
Elite Member
Charge pressure port--and welcome to the group
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,074
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Welcome to TBN! /forums/images/graemlins/wink.gif
pajoube
Veteran Member
- Joined
- Oct 11, 2001
- Messages
- 2,225
- Location
- Montana (Near Bozeman)
- Tractor
- Former Owner PowerTrac 425 (September 2003)
Welcome to the PT owners group and this forum. Congratulations on your new machine.
I posted pictures of the fluid bleed port. It is in this forum back on page 12 titled Hydraulic Fluid Bleed/Break Release - New 425.
This should help you identify for hose connection.
PJ
I posted pictures of the fluid bleed port. It is in this forum back on page 12 titled Hydraulic Fluid Bleed/Break Release - New 425.
This should help you identify for hose connection.
PJ
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,074
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
That would be here! /forums/images/graemlins/grin.gif