freedomlives
Platinum Member
- Joined
- Apr 12, 2015
- Messages
- 566
- Location
- Husak, Slovakia, EU
- Tractor
- Iseki TS35F, Goldoni Special 140 with powered trailer -- Goldoni Special 128 -- Goldoni Uno for mowing -- Czech Vari system
What is the "ideal" spacing for these tires when using the double rotary plow? The one Berta manual I found online talks about using 5.00-10 tires, but I have what I have on my tractor.
I'm just now really plowing, whereas before I was making raised beds and swales, so I'd like to get it "right". I started with 6cm spacers under each wheel, which gave 39cm between tires. But I felt like the full 12" of the rotary plow wasn't engaging.
I removed those spacers, but 28cm the tractor wants to tip over.
Now I'm going to try 41cm and 51cm, the remaining combinations that aren't extremely wide.
I really don't know what is optimum, and I wonder if the tires / wheels just aren't too large.
I'm just now really plowing, whereas before I was making raised beds and swales, so I'd like to get it "right". I started with 6cm spacers under each wheel, which gave 39cm between tires. But I felt like the full 12" of the rotary plow wasn't engaging.
I removed those spacers, but 28cm the tractor wants to tip over.
Now I'm going to try 41cm and 51cm, the remaining combinations that aren't extremely wide.
I really don't know what is optimum, and I wonder if the tires / wheels just aren't too large.
