On 6210, won't start. I have no 12v to fuel pump. I understand the red to black wires at connector are power to pump. I have connector disconnected from pump. Switch turned on of course. Checked fuse, 30 amp. I can't trace out the wires. Don't know what to do next, any help would be appreciated.
6210 Fuel Pump, No Power
- Thread starter Believer
- Start date
- Views: 5231
I figured out a little more. I knew the pump was supposed to come on during run so I found the red pump wire at the switch. I AM getting 12v at the pump (red wire) to ground....but not to to the black wire with switch to RUN. I'm assuming the black wire is supposed to go to ground but I do not have continuity of the black wire to ground. Can anyone tell me if the black wire is supposed to be ground? I'm about ready to tie it to fround.
Zebrafive
Super Member
Yes the black wire is the ground wire.
