730 extra bolt

   / 730 extra bolt #1  

mwh0428

New member
Joined
Jun 3, 2014
Messages
9
I have a 730 diesel electric start that I'm working on, it was taken apart a year ago and I got the gear covers on on both sides. We found this bolt sitting behind a couple parts we had on the shelf and it had to come off the tractor. I obviously overlooked something but I can't find where this bolt went if anyone can reconize can you tell me where it goes. Its a 7/16 bolt. Thanks in advance
 

Attachments

  • IMG_20200114_164204491.jpg
    IMG_20200114_164204491.jpg
    3.5 MB · Views: 195
  • IMG_20200114_164200517.jpg
    IMG_20200114_164200517.jpg
    3.4 MB · Views: 187
   / 730 extra bolt #2  
:welcome: to TBN
Give us some ideas what part of the 739 you had apart.. gear covers off on both sides?? any more pics of the tear down?

Have you been following a service tech manual or looking in jdparts?
John Deere Parts Catalog

Some good clues may help trigger a member's mind.

What is the length?
 
Last edited:
   / 730 extra bolt
  • Thread Starter
#3  
We are rebuilding the motor had both gear covers off and had the block out, took crank and bearings out, etc. We have the IT book for it but that isn't a huge help. The bolt is four inches long. I know this bolt goes in the motor area somewhere. I looked at the parts diagrams on Deere's website but I could not find a bolt like this one.
 
   / 730 extra bolt
  • Thread Starter
#4  
I took the cover off the right side to try and see if I could find where the bolt goes.
 

Attachments

  • 1579106736417198208243409292959.jpg
    1579106736417198208243409292959.jpg
    3.7 MB · Views: 193
  • 15791068046102272641943004651145.jpg
    15791068046102272641943004651145.jpg
    3.7 MB · Views: 193
  • 15791072266155089724116159804141.jpg
    15791072266155089724116159804141.jpg
    3.6 MB · Views: 183
   / 730 extra bolt #5  
End of the harmonic balancer.....maybe? The fold over lock makes me thing it's someplace prone to vibration loosening..........Mike
 
   / 730 extra bolt #6  
There is a bolt that size, and special washers, but doubt that is what you missed installing. But it fits the size..
 

Attachments

  • 730_cam_bolt.jpg
    730_cam_bolt.jpg
    59 KB · Views: 187
  • 730_camshaft_bolt.jpg
    730_camshaft_bolt.jpg
    37.9 KB · Views: 165
   / 730 extra bolt
  • Thread Starter
#7  
So it was in fact that bolt just got it back in today we've had other stuff come through the shop so that's been keeping me busy. In the hole for the bolt there was a set of threads at the end and I had a bolt sitting here that had a washer on it and it guess I didn't think it through. But thanks for the help on it. This tractor is almost like a jigsaw puzzle, partially because we took it apart a year ago. Thanks again for the help here guys 👍
 
   / 730 extra bolt
  • Thread Starter
#9  
Can you guys help me find where these go this puzzle keeps getting pieces added to it. Thanks in advance
 

Attachments

  • IMG_20200120_102930414.jpg
    IMG_20200120_102930414.jpg
    4.1 MB · Views: 173
   / 730 extra bolt #10  
mwh
Can you find your way into the jdparts site? That would be the place to look for the studs and pieces you show.
 

Tractor & Equipment Auctions

2012 VOLVO A40F 6X6 OFF ROAD DUMP TRUCK (A51246)
2012 VOLVO A40F...
2018 MDB T5E MDB DISC MOWER (A51406)
2018 MDB T5E MDB...
John Deere 8400R MFWD Tractor (A53342)
John Deere 8400R...
SNOW DOG SALT BOX TRUCK MOUNT SPREADER (A52577)
SNOW DOG SALT BOX...
SLEF CONTAINED KITCHEN (A52576)
SLEF CONTAINED...
BY VALLEY INDUSTRIES 60 R22 823 LOT NUMBER 236 (A53084)
BY VALLEY...
 
Top