laurencen
Veteran Member
- Joined
- Feb 19, 2007
- Messages
- 1,182
- Location
- saskatchewan Canada
- Tractor
- Bobcat Toolcat 5600T Kioti CK20, Cat D2 dozer, Cat 420 tractor loader, Deer 644E loader, Bobcat E32 mini and Bobcat 590 skidsteer, Toro Groundsmaster 325D
our old 743 gets little use but something went to heck and left drive lever was flopping around and wheels were turning, we lifted the cab to find the rear block that moves the hydrostatic had fallen off, not a big deal but after re mounting and going over the neutral setup had no success
we could get it close but it still had rotation in the wheels and resorted to loosening clamp bolts half turn and using a punch mover the block back and forth to get neutral.
initially I tried to find the parts breakdown on Bobcat site to see how it went together but could not find the area on the Bobcat site that had the parts breakdowns, have they changed the site and have they removed the information that was so usefull
we could get it close but it still had rotation in the wheels and resorted to loosening clamp bolts half turn and using a punch mover the block back and forth to get neutral.
initially I tried to find the parts breakdown on Bobcat site to see how it went together but could not find the area on the Bobcat site that had the parts breakdowns, have they changed the site and have they removed the information that was so usefull
