7510 HST Neutral Ajustment

[rbcsaver]

My 7510 HST "forward/reverse pedal won't return to neutral when foot pressure is
released. It tends to continue to creap forward slowly, and sometimes requires foot
pedal adjusting to get it to restart.

Can anyone help with directions on how to adjust the pedal so it returns to neutral.
Thanks,
Steve

 

[Egon]

I am only familiar with the HST on a Kubota B7100 and these comments are for this tractor. Yours may be very similar.

But: Check the v'd centering plate underneath and insure the roller is properly centered on the V.

There may also be a bolt or screw on the side that will allow you to fine tune the forward/reverse null point.

 

[rbcsaver]

Bump and Thanks,
Steve

 

[lp333]

... "forward/reverse pedal won't return to neutral when foot pressure is released...

Don't forget to lubricate the mechanism from time to time. Also, normal wear and tear will eventually require that the HST linkage be "ajusted for neutral". The BX series has a "neutral adjust lever" and "screw" for this purpose; it is located on the right side of the tractor behind rear wheel. I would expect your tractor to have a similar adjustment somewhere.