790--Tool Box

BILLYFNEW · Jul 20, 2003

Does anyone have a suggestion on how and where to mount a tool box on the 790? It doesn't have to be a real big one, just large enough to hold some of my precision tools like a big hammer and a big crescent wrench, plus a few others.
Thanks, Bill

yellowsocks93 · Jul 20, 2003

Hi, I would get the tool box off the old 70 series and mount it on your 790. There used to be a toolbox kit for the 70 series but it id no longer available. You can still order the parts though. The kit was AM11620 but you can use the parts catalog on JD's website search under 670, 770 and it will bring up the 70 series parts then go into operators station and you will see the # for the toolbox and attaching hardware. I want to do this to my 990 when it comes in also.

Nick
990 4x4 turf, 430 loader, 272 RFM, 25A flail

yellowsocks93 · Jul 20, 2003

I am not sure if it can work on the 790 but is should since it is just like a 770.

Nick

snAKes · Jul 21, 2003

Here is how I mounted an ammo box on my 4010

snAKes · Jul 21, 2003

A picture of how it is mounted to the ROPS.

I sprayed the inside with paintable rubberized undercoating.

neilw · Jul 23, 2003

No Pictures but I use an 30 cal. ammo can on the front weight hanging bracket. It does not interfere with the FEL.

rpatton · Jul 24, 2003

snakes , what brand of hitch is that on the back? looks like the jd i-match . The local tractor supply has them forsale also and they look the same ,the jd one might be finished a little nicer. how much are the adapters for each attachment? Rich

smilingreen · Jul 25, 2003

Bill,
Mounted my toolbox on my 790 on the right hand fender. There were rubber plugs there for a handle, but no handle. Drilled 2 holes in the bottom of the metal toolbox and mounted right to the fender. Works great, and has been on for 2 years.

Conservative1 · Jul 26, 2003

Smilinggreen- we're neighbors... I'm north of Lebanon, near the river.
Quick question, I thought about mounting a small box on the right fender of my new 790, in the same manner in which you did, but was concerned about too much weight on that fender... I have R-1's, and there isn't much clearance. How much would you guess your toolbox weighs, and what kind of box did you mount? Any problems with weighing down that fender?
We might hafta get together for a cookout and a pull-off one of these days. /forums/images/graemlins/wink.gif
C1

smilingreen · Jul 27, 2003

C1,
Toolbox weighs around 15 to 20 pounds with all my junk (bolts, nuts, washers, lynch pins, hammers, big cresent wrench, fence pliars, chain vise grips, etc) and I don't have any problems with the fender sagging. In fact, when using the FEL for long extended periods of time, it makes a great elbow rest, which is then holding my head up, also!!!! I think I got the toolbox at.....hmmmm, I think it was TSC.
Yup, I live out in the TXR (Tuckers Crossroads) area, off Sr141, about 2 miles from the Smith County line. You must live up near my ex!! /forums/images/graemlins/ooo.gif I am up your direction about 3 times a week. I mow a repo house for one of the Lebanon Banks on 231N. just North of Philidelphia road. Got another customer up on Cedar Grove Road, and one on Hamilton Chambers Road. Ya, well have to get together some time. Who did you buy your 790 from?? Roland Implement or from Richard down at Wilson tractor & Turf?? Talk at ya later.