I have an 870 with an 8A backhoe that blew out the dipper arm cylinder pulling a few stumps. The cylinder is beyond rebuild and repair as per the hydraulic folks who have rebuilt several others. I can't find a parts number and they can't find an after market replacement. HELP,,,need to get it fixed because spring is short and wifey's got garden stuff waiting....Where can you get parts for these older 8A backhoes?
8A backhoe help from Maine
- Thread starter p herm
- Start date
- Views: 2371
dsmau
Silver Member
Looks like it is available from JD. Check jdparts.com. here is the drawing.
Looks like it is part number PT10402 and it costs around 900.00.
BTW, these are made by ARPS I think and should be the same as the Ford 758 so if you can get it cheaper there or get a used one...
Looks like it is part number PT10402 and it costs around 900.00.
BTW, these are made by ARPS I think and should be the same as the Ford 758 so if you can get it cheaper there or get a used one...
kennyd
Advertiser
Welcome to TBN
Why can't it be rebuilt? Can you post pictures?
Why can't it be rebuilt? Can you post pictures?
