8n

   / 8n #1  

farmerdean

Member
Joined
Aug 9, 2011
Messages
27
Location
NW missouri
Tractor
1947 ford 8n
getting ready to replace throttle quadrant. don't see anything in either book about that. must be self explanatory. also need to know if there's a problem w/ using multi viscosity engine oil. i'm thinking rotella 15/40.
 
   / 8n #2  
No info on the quadrant replacement, but I've used 20w50 motorcycle oil in my 8n for years. When I pulled the engine down this past spring all the bearings looked like new. I replaced the rings but the old fords with only 2 oil rings are noted for ring wear.
 
   / 8n
  • Thread Starter
#3  
i figured out the quadrant deal. all i have to do now is get the screws out. i'm spraying penetrating oil and biding my time. thanks for the oil info. i figured as much.
 
   / 8n #4  
15w40 is a great oil.. I use it in all my gasser tractors now, since I had it on hand for my diesels.

soundguy
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
HOMEMADE TREE STAND W/ STEPS (A51248)
HOMEMADE TREE...
(2) 300 GALLON POLY TOTE (A51248)
(2) 300 GALLON...
MURRAY 22" GAS PUSH MOWER (A51248)
MURRAY 22" GAS...
Generac Yanmar 5000Watt Heavy Duty Diesel Generator (A51691)
Generac Yanmar...
(INOP) JOHN DEERE 730 CRAWLER TRACTOR (A51243)
(INOP) JOHN DEERE...
 
Top