ChuckE2009
Silver Member
- Joined
- Jun 4, 2010
- Messages
- 131
Morning, everyone! 
This is my newest project... I go through a LOT of 2" flat bar stock, 3/16 and 1/4 thick in the production of my YouTube videos, and I'm always looking for a better way to slice & dice it so its ready to use...
I decided I'd make a combination dead-stop and straight edge for the plasma to speed things up, and so I did... I used nothing but scrap metal from around the shop, leftovers from other projects, and A/C on my Hobart Stick-Mate (which I resurrected for this build) just to make things that much more interesting.
I completed this build with 6011 and 6013 only:
And I'm pretty thrilled with how it came out. The guides are fully adjustable width-wise on a pair of rails, they're just clamped down so I can set this device to cut flat stock from 1" in width, to 10" wide.
Also, the straight edge can be moved back and fourth, distance wise, so that I can cut strips between 1" and 8" long.
Anyway, I really enjoyed this project... Hope you guys like the video :cool2:
This is my newest project... I go through a LOT of 2" flat bar stock, 3/16 and 1/4 thick in the production of my YouTube videos, and I'm always looking for a better way to slice & dice it so its ready to use...
I decided I'd make a combination dead-stop and straight edge for the plasma to speed things up, and so I did... I used nothing but scrap metal from around the shop, leftovers from other projects, and A/C on my Hobart Stick-Mate (which I resurrected for this build) just to make things that much more interesting.
I completed this build with 6011 and 6013 only:
And I'm pretty thrilled with how it came out. The guides are fully adjustable width-wise on a pair of rails, they're just clamped down so I can set this device to cut flat stock from 1" in width, to 10" wide.
Also, the straight edge can be moved back and fourth, distance wise, so that I can cut strips between 1" and 8" long.
Anyway, I really enjoyed this project... Hope you guys like the video :cool2:
