Accessory mounting brackets on ck 3510 HST?

[Skidrowe18]

Hi All,
I was washing the tractor today (sorry to my friends in the frozen tundra) due to recently being stuck in the mud up to the axils. As I was walking around I was looking for a mounting location to add a toolbox and noticed these brackets in the rear. I know others have used other locations to mount but was curious what these were originally intended.



Also on the right side there is another bracket that I am currently using to hold a wrench.



Any ideas?

 

[powerscol]

Cab mounting points?

 

[schaapk]

The brackets around the gas tank are not for cab mounts. I just had a field kab installed and those mounts were not used. But I am going run a piece of unistrut across the back mounts and than attach my tool box.

 

[Skidrowe18]

Sounds like these are a mystery...

 

[Skidrowe18]

Wow, really surprised no one has a clue....

 

[powerscol]

This may sound dumb. but what do the owners or parts manual say? Possibly the part name will help.

 

[Billrog]

Work lights + ?

 

[Joendoodle]

Hi All,
I was washing the tractor today (sorry to my friends in the frozen tundra) due to recently being stuck in the mud up to the axils. As I was walking around I was looking for a mounting location to add a toolbox and noticed these brackets in the rear. I know others have used other locations to mount but was curious what these were originally intended.

View attachment 453271

Also on the right side there is another bracket that I am currently using to hold a wrench.

View attachment 453270

Any ideas?

Here it is 10 years later.. I am wondering the same thing... I recently joined the Kioti club with a CK2620, I noticed the same brackets. Of note the right (lower) one the holes have 8*1.25 nuts (my label) welded to the back side, the left lower bracket has 2 smaller

holes (not threaded). Absent any "known purpose" I will likely weld some angle iron and make a toll box bracket or something similar.