Adapting lever remote to full time hydraulics

   / Adapting lever remote to full time hydraulics #1  

lej

New member
Joined
Aug 10, 2011
Messages
14
Location
Harmony, Indiana
Tractor
ford jubilee & foton 404
When I asked if anyone had any ideas for this the only thing I got was a bungee cord. This would be in the way - not acceptable. I ended up mounting a barrel latch and now can easily lock the remote lever on when using logsplitter or back hoe attachment.
 
   / Adapting lever remote to full time hydraulics #2  
Good idea. That is a nice way to solve that problem.
And welcome to TBN.
gg
 
   / Adapting lever remote to full time hydraulics #3  
Pictures please
 
   / Adapting lever remote to full time hydraulics #4  
My DK series Kioti came from the factory with a detent position on the control valve. I had the dealer remove it before delivery. Too easy for an inexperienced person to accidentally kick it into detent and deadhead the pump.
 

Tractor & Equipment Auctions

2015 FORD F750 26FT BOX TRUCK (A51219)
2015 FORD F750...
2017 UTILITY VS2RA 53FT REEFER TRAILER (A51222)
2017 UTILITY VS2RA...
2007 INTERNATIONAL 4200 SBA 4X2 DUMP TRUCK (A50459)
2007 INTERNATIONAL...
2020 Cat 299D3XE Skidloader (RIDE AND DRIVE) (A50774)
2020 Cat 299D3XE...
12.7 LITER DETROIT GENERATOR SKID (A50854)
12.7 LITER DETROIT...
2010 VOLVO ECR145CL EXCAVATOR (A50854)
2010 VOLVO...
 
Top