Adding Auto Cruise to 3120

Deere Man · Mar 27, 2007

All,
I would like to add the automotive style cruise switch as well as the motion match switch to my 3120. It seems as though there was a post on here where someone had done that by just purchasing a switch and possibly a harness. I've searched and can't seem to find it. Can any of you steer me in the right direction as to if this can be done and what all it takes?
Thanks
Scott

GATOR445 · Mar 27, 2007

Hello

you need to order lvb25548 kit for the cruise. then the dealer will need the to change the address in your controller so it knows that the auto cruise was installed.

Kahuna · Mar 27, 2007

I bought a 3320 last fall and had the dealer add the automotive style cruise control as part of the package. It is about $80 list. They will punch out two spacers on the side console near the existing cruise control and the rest is plugged in. The computer setting on the dash will need updated. It took the dealer about 30 minutes to do everything. I like the resume and one touch fast or slow feature.

Deere Man · Mar 28, 2007

Thanks for the help so far. I ordered the kit yesterday ($86) should be here by the weekend. It seems like the post I read said that changing the settings wasn't that hard to do if you had the service manual. I don't have it yet but was wondering if anyone knew the procedure or knew if it was in the service manual?

Kahuna · Mar 28, 2007

All the settings you need are in the owners manual.

Deere Man · Mar 28, 2007

Kahuna,
Thanks for replying and all of your help. I was talking about the computer settings that you mention need to be done by the dealer to make the tractor realize it has these switches installed. I was hoping that was osmething I could do as it is a pain to get the unit to the dealer.