Adding external 3PH control for 2555 shuttle? cab

   / Adding external 3PH control for 2555 shuttle? cab #1  

OzarkChris

Gold Member
Joined
Dec 26, 2020
Messages
386
Location
Calamine AR
Tractor
Mahindra 2555 Shuttle Cab
I'm hoping I can add/fabricate a simple external control for the 3PH. I was told when I purchased this tractor (a barely used 2019 - 45 hr) about 6 months ago that the factory has a package that goes by the rear lights, but that appears to need some major changes - solenoids etc. So I'm guessing it would be quite $$$. Looking at the current mechanism it looks like I should be able to just add a handle to the external linkage but wanted some advise before I do something I shouldn't do. I would also like to do remotes from back there as well - for hydraulic toplink.

Any suggestions would be greatly appreciated!
 
   / Adding external 3PH control for 2555 shuttle? cab #2  
I was wondering the same thing on my 2645. There are places (cutouts) by the rear lights which could accommodate momentary switches for such a function. It would require significant changes due to the fact the current control valve is manual rather than solenoid controlled. An extension welded to the current manual control may suffice however future servicing could be impacted significantly.
 

Tractor & Equipment Auctions

2014 PETERBILT 388 AUTO TRANSPORTER (A51222)
2014 PETERBILT 388...
John Deere 6105E Tractor, 105HP, 4WD, Suspension Seat, A/C, 3 Rear Remotes (A51039)
John Deere 6105E...
2020 CATERPILLAR 289D3 SKID STEER (A51242)
2020 CATERPILLAR...
2017 Claas Jaguar 860 Forage Harvester (A51039)
2017 Claas Jaguar...
2018 Ram 5500 Bucket Truck 4x4 with Versalift VST40 - 45FT Rotating Bucket and Jib Winch (A51039)
2018 Ram 5500...
1986 CATERPILLAR D6H HI-TRACK CRAWLER DOZER (A51242)
1986 CATERPILLAR...
 
Top