Massey1010
Member
I have a self feeding Wallenstein BX62. I was wondering if it is possible to add an automatic feed to this unit?
Chipper Adding hydraulic feed to Wallenstein chipper
- Thread starter Massey1010
- Start date
- Views: 4511
tree farmer
Silver Member
Yes. It's easy to do, but a little spendy. I was quoted around $2100. more for hydraulic feed
. To me, it's been worth it. All the hydraulics are mounted on the feed hopper, which is attached to the chipper housing with 2 bolts, just like the self feed models. As you probably know, the hydraulics are run from the remotes on the tractor. The flow control lever is located on the main valve body, which allows the dual feed rollers to turn at infinitely variable speeds. On my BX42, the hyd. hopper added about 200 lbs., making it 625 lbs. I would imagine the additional weight on your BX62 would be similar.....Dan.
. To me, it's been worth it. All the hydraulics are mounted on the feed hopper, which is attached to the chipper housing with 2 bolts, just like the self feed models. As you probably know, the hydraulics are run from the remotes on the tractor. The flow control lever is located on the main valve body, which allows the dual feed rollers to turn at infinitely variable speeds. On my BX42, the hyd. hopper added about 200 lbs., making it 625 lbs. I would imagine the additional weight on your BX62 would be similar.....Dan.
Ductape
Elite Member
What Dan said.......... the difference is all in the hopper, which is a bolt-on operation. When I was pricing it out, I think I was quoted about $2500 for the change-over. But, $2100 ....... $2500, what;s the difference.
