Adding lights to the ZD326.

[ka41]

I just added led lights to my L5240 and it was a piece of cake. My 5240 had a harness behind the seat to tie in to. I'm about to add led's to my ZD326 and was wondering if it has a harness as well. I did look in the fuse box and there is a space for a 20 amp fuse for a work light. Have any of you added lights to your ZD?

 

[jcummins]

I haven't but have thought about it. Some days even in Illinois to hot during the day.

If you do it, take some pics and post them.

 

[ka41]

Ok so late this evening I decided to do a little exploring on the ZD and I found the harness plugs. I traced the wires from the fuse block (red with green stripe) to 2 locations. One is located near the battery, just in front of the neg post, and the other is on the left side toward the bottom of the rops, behind the gas tank. Both are clear "T" female spade connectors covered with black electrical tape. Hopefully I will be able to work on lights this weekend.