I have a Kubota B6200D with a FEL. Rear hydraulics was an option but dealer says kit is no longer available. Can I just tee off of the front ports that are for the loader and run them through valves and to the rear? I want to add power angle to my rear blade and maybe a hyd. top link.
adding rear hydraulics
- Thread starter dvan1966
- Start date
- Views: 2989
mcnitt
Silver Member
Hello - and welcome to TBN!
There's lots of after market valves out there. I'm no expert, but if you'll do a search for "power beyond" you should find lots of ideas about hydraulic access. Good luck!
There's lots of after market valves out there. I'm no expert, but if you'll do a search for "power beyond" you should find lots of ideas about hydraulic access. Good luck!
Tig
Elite Member
I'm not a hydraulics expert but.....
Hydraulic circuits must be in series. ie one after another. If you use a T as you described the circuits will be in parallel and neither will work since the pressure will by diverted by the other circuit.
Hydraulic circuits must be in series. ie one after another. If you use a T as you described the circuits will be in parallel and neither will work since the pressure will by diverted by the other circuit.
3RRL
Super Member
- Joined
- Oct 20, 2005
- Messages
- 6,931
- Tractor
- 55HP 4WD KAMA 554 and 4 x 4 Jinma 284
Tig is right in that you can't just "T" off.dvan1966 said:
Do you have any other valves besides your fel loader valve? If not, you need to feed your new valve from the power beyond port on the fel valve. You will probably need to get a power beyond sleeve that fits into that port, if it's plugged off now. Run a hose from there to the power "in" on your new valve. The "exit" of your new valve, or return to sump, can be "Teed" into the return to sump or tank ... same place your fel valve is returning to now (to tank).
bota7800
Gold Member
There are pictures in the gallery of how my remotes are plumbed if that helps
justcountry
Bronze Member
There are lots of option, you just have to pick the ones that suit your needs and wallet. With a little mechanical know how, you can save tons of money. drop me a PM if u have any ?
tommu56
Elite Member
dvan1966
Some times the kit isn't available but the parts are.
Maybe the priority block or valve is available and you could wing it after that.
tom
Some times the kit isn't available but the parts are.
Maybe the priority block or valve is available and you could wing it after that.
tom
MichiganIron
Silver Member, Advertiser
- Joined
- May 12, 2008
- Messages
- 830
- Location
- Central Michigan
- Tractor
- Full line of KIOTI Tractors, BEFCO and Worksaver Implements
Try the Tractorsmart website. They are a pretty good resource for early model Kubota parts and kits.
