Adding rear scvs to 3032E?

   / Adding rear scvs to 3032E? #1  

Rick Moen

New member
Joined
Oct 29, 2011
Messages
16
Location
South Dakota
Tractor
JD L120, Kioti CK3510SE HC
I know you can buy a kit for this (about $750):( from John Deere but I was wondering if anyone has done this without buying the kit and just making their own with parts and hoses from supply stores. If so, was it cheaper?
 
   / Adding rear scvs to 3032E? #2  
I should be putting my valve to run my blower chute back on the tractor tomorrow. I'll try to take some pictures. I used a compact loader valve from surplus center, and connected to the power beyond. If you do not have the power beyond, you can add it either by the I'd kit, or DIY. There is a thread by Kennyd I think, that outlines it.
 

Tractor & Equipment Auctions

30ft Pole S/A Towable Trailer (A49346)
30ft Pole S/A...
2005 John Deere 824J Articulated Wheel Loader (A49461)
2005 John Deere...
Lift station Pumps (A49461)
Lift station Pumps...
2016 Ford F550 4x4 Bucket Truck with Altec AT41 - 46FT Rotating Bucket and Jib Winch (A51039)
2016 Ford F550 4x4...
Kubota 24in Quick Attach Compact Excavator Tooth Bucket ONE PER LOT (A51039)
Kubota 24in Quick...
71065 (A49346)
71065 (A49346)
 
Top