Adding remote valve

[thesle]

Thinking of installing a dump cylinder on my dirt scoop My tractor is Case/international 245, 21hp 4.5gpm hydraulic.
The output line runs from pump to power steering then to 3 pt power lift housing. My question is can I tee into this pipe with a suppression fitting for the hose to the remote valve. I,m thinking a 1.5 bore ,10" stroke will work to dump the scoop. Thanks for any Info.

 

[J_J]

Just insert the new valve between the PS and the 3pt.

Valve should have a PB port.

No tees in the pressure line.

 

[thesle]

Thanks much JJ simpler than I was thinking. Have a blessed Thanksgiving. thesle