Additional Hydraulics to front of UW56

[Livewyre]

Has anyone added more hydraulic connections/circuits to the front of a UW56? i need 2 more circuits (4 more connections) to run some implements using a motorized 3 pt adapter. 2 of the hydraulic connections are used for continuous flow to the PTO motor. the other 4 connections will be for the controls like angling and rotating the chute for a snowblower, in/out and up/down for a flail mower, etc. Also has anyone been able to use the Toolcat joystick buttons to control the additional hydraulics?

 

[Xfaxman]

2 of the hydraulic connections are used for continuous flow to the PTO motor.

Do you know the flow for the PTO motor?

Use a flow divider to keep the PIO motor at speed and the other output for the other functions.

hyd flow divider - Google Search

 

[Livewyre]

Sorry for the delayed reply on my end. The flow of the PTO motor is 22GPM max. I was looking into some valve controllers on Summit Hydraulics, but have not been able to narrow anything down yet.