Adjusting hst pedal-B3350 HSDC

[bumperm]

Anybody? Bueller? Bueller? I've lubed everything I can find that moves wiggles or slides. The neutral safety switch (that prevents tractor start) had moved in it's slot outboard so the plunger wasn't engaging and the tractor wouldn't start. The 22mm nuts were a devil to get to, long pliers or make a thin 22 mm crowsfoot wrench, course that doesn't stop the forward creep.

 

[sandyc]

I gave up fiddling around and now I just live with it. Use neutral a lot

 

[bumperm]

Sandyc,

There's more info on the problem here: https://www.tractorbynet.com/forums/kubota-owning-operating/6227-hst-creep.html

I haven't tried adjusting the neutral adjust screw yet. I'll check the shop manual first and then have at it. Pretty sure most Kubota HSTs are similar.

I'll see how it goes and post back.

 

[bumperm]

Had the backhoe on, so put it in 2 wheel drive and lifted it up with loader and stabilizers. Neutral is pretty close to right (I didn't adjust it) as the wheels stopped some of the time or after tapping the reverse pedal. So I'll lube every thing I can find that moves once again.