Advice on used CUT for 6-8K?

   / Advice on used CUT for 6-8K? #1  

Staghead

Member
Joined
Jun 28, 2006
Messages
26
Location
Rochester, Mn
I've been a reader of these forums for quite a while, but new to posting. This site is a excellent resource.

I'm looking for a tractor primarily to do loader work. Only own about 1 and 1/2 acres, but would like to do extensive landscaping. Our lot is mostly wooded at this point. I want to clean up a lot of the buckthorn and other underbrush and build a couple different types of storage sheds. I want to level the ground and put in several walkways and gardens as well.

The tractor would also be used 4-6 times a year at my parents place for loader work with some potential mowing and/or leveling.

So, primarily looking for about 25 HP with a loader. I would be able to spend 6-8K within a year or so or wait 4-5 years and get a new one for 15-17K or so. I just really want a loader at this point, but want the option of adding a MMM and possibly a snowblower. Also want to be able to use a box blade and other small landscaping attachments. If I go the used route I would probably trade it for a newer one at some point, but I would intend to keep a new one for the long haul.

I'm in no hurry, but don't know if I can even find what I am looking for in this price range.

Any general advice is appreciated. Specific brands/model numbers would also be helpful.
 
   / Advice on used CUT for 6-8K? #2  
With only 1 to 1.5 ac to deal with.. I'd think any SCUT would do you. That is.. a small kubota BX.. or a NH TZ.. or small TC series. Perhaps a tc18 with a loader.

Soundguy
 
   / Advice on used CUT for 6-8K? #3  
Staghead,

Check with the guys over in Mazzeppa Minnesota. Use to be called B&B but just was bought out by the guys in Wanamingo. I am almost positive they had a TC18 or 21 used over there with a loader and a MMM on it. It might run you a bit more than the 8K but might be worth looking at.

murph
 
   / Advice on used CUT for 6-8K? #4  
You should be able to find one in that price range. You may have to be a little patient. You may be able to get a new Chinese one for a little more than 8k. If you know you want new soon, that could also make a nice down payment and many of the different brands are offering 0% for 3 years. Recently I saw Mahindra was offering 0% for 4 years on a couple of their models. You could also find a nice gray market in your price range.
 

Tractor & Equipment Auctions

4K SAND SEPARATOR (A52472)
4K SAND SEPARATOR...
2019 FREIGHTLINER CASCADIA TANDEM AXLE SLEEPER (A52576)
2019 FREIGHTLINER...
JOHN DEERE 17P LOT NUMBER 227 (A53084)
JOHN DEERE 17P LOT...
2017 Ford Explorer AWD SUV (A51694)
2017 Ford Explorer...
2023 Dynapac cc900 Double Smooth Drum Roller (A51573)
2023 Dynapac cc900...
2012 DODGE DURANGO SUV (A52576)
2012 DODGE DURANGO...
 
Top