Ag Meier Mustang Finishing Mower

Texas Dodge · Apr 15, 2023

So I broke a belt that drives all 3 pulleys for the blades. I decided to order extra belts in case I do this again in the future. My manual says the drive belt is a KTR131-64 part number. The other belt for the blades is KTR131-124. I assumed the last number was the length of the belt. I ordered new belts off of e-bay and tried installing today, but no luck belts are too short. I have been searching the net using the part numbers to try and figure out what the actual belt length is, but no luck. I think the drive belt needs to be 67” in length and the other belt needs to be 127” in length. I was hoping someone on here had some experience with v-belts that could verify these lengths. Thanks in advance.

lens12 · May 6, 2023

I have bought parts from Ag Meier as a dealer, but can't confirm what belts they are.

LS Tractor Owner · May 6, 2023

Call RCO tractor in Spicewood or Greenville Tx. Ask for John, or the service dept. They are a distributor for Ag Meier, may actually stock the belts. They should be able to at least get a length for them.

LS Tractor Owner · May 12, 2023

Wow, what a weeks time can make..... got notified yesterday that RCO is closing, don't know why.....

Texas Dodge · May 14, 2023

I talked to the parts guy at Ag Meier, he said the drive belt is 64” and the longer belt for the blades is 124”. That is exactly what I ordered. Got the longer belt on, but the 64” is being a pain in the butt.