117
New member
I had to change the hydralic pump on my tractor and now have air in the system, how can i get it out?
air in system
- Thread starter 117
- Start date
- Views: 1019
MapleLeafFarmer
Platinum Member
- Joined
- Jun 20, 2011
- Messages
- 599
- Location
- Canada
- Tractor
- lots including Kubota B's, L's, cat, etc.. over many years
fire it up and cycle the cyl. including steering wheel lock to lock.
it should self bleed.
it should self bleed.
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Cycle all hyd cyl on the tractor about 5 times until the relief comes on.
The air should flow back to tank.
Some people also loosen up the fittings and push fluid through the cyl and air will exit through the fitting. .
The air should flow back to tank.
Some people also loosen up the fittings and push fluid through the cyl and air will exit through the fitting. .
