i'm needing new hydraulic cylinders for a d17 IV. they're leaking and it's going to be cheaper to buy new ones than to have them rebuilt. what i need to know is the length of stroke. they're already off the tractor so i can't extend them. thanks for any help.
Allis d17 hydraulics
- Thread starter sa1765
- Start date
- Views: 1695
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Why can't you extend them.. are they stuck?
No reason why a hyd cyl off the tractor can't be extended.
Soundguy
No reason why a hyd cyl off the tractor can't be extended.
Soundguy
Hard Knocks IV
Member
- Joined
- Aug 5, 2006
- Messages
- 45
I have a Series 4 rear here so I'll try to measure a parts yard should have good used ones. The AC 170 and 175 used the same cylinders as they are basically the same tractor as the Series IV
