Good day to all.
I am looking for answers for leaking buckets cylinders. I have a 2004 TC55DA with an 18LA loader installed. I recently got tangled up in some logs and pulled the piston off of one of my bucket lift cylinders. The cylinder wasn't damaged other than the threads being stripped from the rod in the cylinder. I am a mechanic by trade so rebuilding the cylinders wasn't an issue but now the bucket will not stay where you want it, it constantly bleeds down. I think it is either in a relief valve or the controller. The loader has down this to a very small degree since I bought it but it was never severe enough to be an issue but now ... I see on here where some are calling it a "soggy" bucket so I plan to look around and see what some of you have found for a solution
Twisted
I am looking for answers for leaking buckets cylinders. I have a 2004 TC55DA with an 18LA loader installed. I recently got tangled up in some logs and pulled the piston off of one of my bucket lift cylinders. The cylinder wasn't damaged other than the threads being stripped from the rod in the cylinder. I am a mechanic by trade so rebuilding the cylinders wasn't an issue but now the bucket will not stay where you want it, it constantly bleeds down. I think it is either in a relief valve or the controller. The loader has down this to a very small degree since I bought it but it was never severe enough to be an issue but now ... I see on here where some are calling it a "soggy" bucket so I plan to look around and see what some of you have found for a solution
Twisted
