Any Co. ever manuf. a 14' transport disc w/ wings?

[hotchkiss]

I have been trying to figure out if any company ever made a 14 foot transport disc with wings. In other words, the overall width was 14 feet with the wings down.

 

[roush9799]

Not sure, but I know there's some 15' disks with wings. I believe they're about 8 foot wide folded up.

 

[art]

I don't remember anything less then 17' with wings and some manufacturers went to 16' plus fixed width. For many areas with width restrictions it would be a good idea but quite costly with the hydraulics that would be needed.

 

[roush9799]

International made a model where you flip each spool over by hand with springs attached to lighten the load, then you bolted them in place when it was folded over. Only hydraulic is the up and down. We have one out back in the weeds, not sure what width it is exactly, i know it's not over 10' folded.

 

[hotchkiss]

I know Allis Chalmers made a 14 or 15 foot disc that had wings and was less than 10 feet wide to transport.

What model international was less than 10?

 

[RedNeckRacin]

I think our john deere transport disc is 10' wide folded up and 16' down. I can measure it if you need exact measurements though.

 

[hotchkiss]

I would really appreciate you measuring it.

 

[hotchkiss]

I really need to find a disc that will go across a bridge that has a 10 foot wide gate on it. I have a 10 foot disc without wings and it would be really really really nice to have one that would fit though the gate and and unfold to 14 or 16 feet. No, changing the width of the gate is out of my control. Thanks.