Any of you guys have an Iseki with isuzu 2aa1 engine

ymurf · Apr 17, 2017

Hey any of you Iseki guys.I am looking for some info on the 2AA1 Isuzu engine. I am trying to get my Bobcat 533 skid steer going. It has the same engine. Parts are ridiculous to find for these engines. I did find some from Dessco and some from Ebay. I got engine back together but have some parts missing and am needing some info on some parts. There is a spring going from the throttle lever on injector pump to a bracket which I don't have either of them. I can probably buy a spring and make a bracket but need to know how long a spring. Pics would be great.And some other parts. Can any of you guys help me out.I would greatly appreciate it.

lens12 · Apr 21, 2017

I can supply most engine parts. I don't have specs on the spring. I'll have to see if I have an engine with the spring on it.

ymurf · Apr 23, 2017

lens12 said:
I can supply most engine parts. I don't have specs on the spring. I'll have to see if I have an engine with the spring on it.

Thats good to know. I had to order what parts I could find from all over the place. My bobcat 533 doesnt have the little glow thing for the glow plugs so I am trying to figure how to run glow plugs on this before I set the engine in it. The part that glows isnt available anyplace. Any ideas how I can rig this? I am thinking after looking and researching some more that the spring may not have been there to begin with even though its in the parts manual.