Joe H
Bronze Member
I need a couple PBR seals that I can't find here. Any one know of an auto parts store in Australia that will mail me a couple small parts?
Thanks, Joe H
Thanks, Joe H
Anybody Down Under?
- Thread starter Joe H
- Start date
- Views: 1818
banjodunn
Veteran Member
G'day Joe what is the number of the seals you want and what do they fit? I may be able to organise some for you.
Jon
Jon
tracter
Silver Member
Hey banjodunn what part of Oz are you in , near Sydney here
Need 2 of a PBR P4366. It's a brake MC piston seal for this **** Massey 50H made in England backhoe I bought. I think PBR used to be or is part of Repco.
Parts here to fit this Brit machine are like hen's teeth or priced by King Midas.
I found a site down there that listed them for $2+ each and e mailed them but no reply.
P4366. - Trade Parts - Quality Parts at Wholesale Prices!
Used to be able to buy those here, looks the same as the clutch slave on my old (long gone) XKE. Looks like a 3/4" bore Girling cylinder but these are cast iron cylinders with offset mounting holes.
Joe H
Parts here to fit this Brit machine are like hen's teeth or priced by King Midas.
I found a site down there that listed them for $2+ each and e mailed them but no reply.
P4366. - Trade Parts - Quality Parts at Wholesale Prices!
Used to be able to buy those here, looks the same as the clutch slave on my old (long gone) XKE. Looks like a 3/4" bore Girling cylinder but these are cast iron cylinders with offset mounting holes.
Joe H
banjodunn
Veteran Member
G'day Joe have got to talk to my brake man later today and will ask him, if they are available he will be able to get them for me :thumbsup:.
Tracter I am in Ararat Victoria so no I am not near you
Jon
Tracter I am in Ararat Victoria so no I am not near you
Jon
jkis
Bronze Member
- Joined
- Feb 19, 2012
- Messages
- 57
- Location
- booral, nsw, australia
- Tractor
- foton/euro lepard 250 and massey ferguson 65
hi guys, i'm in nsw, 45 mins north of newcastle, little place called booral, near stroud,
parts for the massey's, i get mine from a company called "kentan machinery" which are manly suppled from "bare-co" so they'd be worth a try, i'm sure bare-co are there in the states too, if you google them
cheers stuart
parts for the massey's, i get mine from a company called "kentan machinery" which are manly suppled from "bare-co" so they'd be worth a try, i'm sure bare-co are there in the states too, if you google them
cheers stuart
banjodunn
Veteran Member
G'day Joe, I can get them they are $16 aus a pair plus whatever postage is at cost to you, it is a pity the other crowd did not get back to you as they are def cheaper.
I won't see them until the middle of next week so let me know if you want them:thumbsup:
Jon
I won't see them until the middle of next week so let me know if you want them:thumbsup:
Jon
tracter
Silver Member
Good to know there are a couple more from Oz on the site :thumbsup:
MikeFarm
Gold Member
Hiya
Am from Sydney too, farm is in Central West NSW.
Mike
Am from Sydney too, farm is in Central West NSW.
Mike
Lostalot
Bronze Member
Also a new bloke from up near the pointy bit...regards