Anyone have a PJ 2015 T1 13 or 16 foot ?????

   / Anyone have a PJ 2015 T1 13 or 16 foot ????? #1  

nc redneck

Platinum Member
Joined
Dec 19, 2012
Messages
563
Location
Apex nc
Tractor
Kioti Dk45SE Sold Kubota BX 2200 Sold Kubota B 3200 Loader WR Long 4 in 1
Probably not many owners for this type trailer as it is small. I just sold 2014 24 foot tilt due to my planned sale of Kioti 45. Current needs are Kubota B3200 with 7 foot belly mower ( mower is 77 ) , golf cart, Honda pioneer and scissor lift. 1 axle is a huge plus as it can be moved around with wheel under jack, double axle is much harder. Kubota weighs 1500 lbs scissor lift is the most of all around 3000 lbs.
I am leaning to the 16 foot model just because bigger is better. I would love to hear from any one who owns one.
 
   / Anyone have a PJ 2015 T1 13 or 16 foot ????? #3  
I have the 22' PJ TF. Not sure if the 24' tilt you sold was a PJ but IMO PJ makes a good trailer.
The 16' T1 should work for you if you have enough room to move forward and back for enough tongue weight. The 77" mower should fit between the fenders 81".
 
   / Anyone have a PJ 2015 T1 13 or 16 foot ?????
  • Thread Starter
#4  
Thanks for reply's. 24 tilt was not a PJ but I had one of there large dump trailers a few years ago. I was very impressed with there quality and powder coating. I cringe at the thought of paying almost $4000 for a 13 or 16 foot trailer. It is a true HD small trailer. 7K axle, 16 inch E load tires.
I have looked but have not found anything just like it. The scissor lift is the butt kicker heavy, hard to load needs knife edge and low incline pitch.
The 13 will do every thing I need but have learned bigger is better and leaning to the 16. I do like the 13 for getting in tight places. I sometimes tow it with 3500 long bed 4 door truck. Truck is about 22 feet and a 13 trailer plus tongue you are pushing 40 feet.
Any one who owns one I would love to hear likes and dislikes.
NC Redneck
 
   / Anyone have a PJ 2015 T1 13 or 16 foot ????? #5  
nc redneck, I know this is a 3 month old thread, but was wondering if you ever bought the PJ T1 single axle tilt.
 
   / Anyone have a PJ 2015 T1 13 or 16 foot ?????
  • Thread Starter
#6  
Yes I did I ended up getting the 16. For my uses it is a perfect trailer. I really like the low incline load height, powder coat, and tilt latching set up. The only thing negative is it's heavy for a 16 foot trailer. Still learning it but it tows better with more weight to the rear compared to other trailers I have owned.
 
   / Anyone have a PJ 2015 T1 13 or 16 foot ????? #7  
Thanks for the follow-up. I bought one too. I just updated my thread with pics of mine.
 

Tractor & Equipment Auctions

2011 INTERNATIONAL MA025 ROUSTABOUT TRUCK(INOPERABLE) (A52472)
2011 INTERNATIONAL...
2018 International WorkStar 7400 T/A Dump Truck (A50323)
2018 International...
Wright Sentar (A50120)
Wright Sentar (A50120)
2020 Cadillac Escalade 4x4 SUV (A50324)
2020 Cadillac...
2005 Nissan Pathfinder SUV (A50324)
2005 Nissan...
Dingo TX427 Mini Skidloader (PARTS) (A50774)
Dingo TX427 Mini...
 
Top