Anyone have DRIFT CUTTERS on their JD tractor mounted blower?
- Thread starter subeluvr
- Start date
- Views: 6097
Labrat
Gold Member
21" long 1 1/2" wide and 13" above the top of the blower (mounted)
etcallhome
Platinum Member
Yesterday when I was blowing snow in the church parking lot ,I was wondering what the height was to the top of the drift cutter
I guessing from what you said it most be appx 30" to the top
Most of the time yesterday I was only seeing 3-5 " of the drift cutter..
We had somewhere around 26-28"
I guessing from what you said it most be appx 30" to the top
Most of the time yesterday I was only seeing 3-5 " of the drift cutter..
We had somewhere around 26-28"
PILOON
Super Star Member
Heck, on my 60" rear blower I have 48" drift cutters.
They are made from 3/8" X 3" flat, homemade.
All kidding aside, I really need them out where the city plow leaves his pile.
I could show you pics where the roadside pile is higher than my tractor cab!
They are made from 3/8" X 3" flat, homemade.
All kidding aside, I really need them out where the city plow leaves his pile.
I could show you pics where the roadside pile is higher than my tractor cab!
johnamon
Member
On our 48" JD blower they are 3/16 thick by 1-1/2 wide by 21" tall. They are formed into a shallow U or V.
etcallhome
Platinum Member
johnamon On my jd47" they may be 21" long ,but to the top of them is 31"
johnamon
Member
Hi etcallhome,
I didn't measure the height from the ground, but would agree that there are as you say, 31"
subeluvr,
Do you have what you need? I could get you a photo.
John
I didn't measure the height from the ground, but would agree that there are as you say, 31"
subeluvr,
Do you have what you need? I could get you a photo.
John