I'm trying to attach a Great Bend loader to my Iseke TS1610 4wd. Great Bend doesn't make a mount for this tractor but Koyker makes one for theirs for the 2wd model. Can the Koyker mount be modified to fit the Great Bend? Is there a Great Bend mount for another Iseki (Bolens) that can be modified to fit my tractor? Any suggestions? JC
attaching great bend loader to Iseki ts1610
- Thread starter jco
- Start date
- Views: 2517
-
- Tags
- iseki ts1610
RHughes
Silver Member
I'm not sure about the Koyker mount. I would be a little leery about trying to *make* a loader fit another mount.
If Great Bend wasn't able to help with a custom mount, you might try contacting Bush Hog. The GB and BH loaders are built on the same tooling, I believe.
If Great Bend wasn't able to help with a custom mount, you might try contacting Bush Hog. The GB and BH loaders are built on the same tooling, I believe.
DDT
Platinum Member
- Joined
- Dec 18, 2000
- Messages
- 953
- Location
- Clay Center, Kansas
- Tractor
- Kubota M6040/cab, BX25D, RTVX900
I have a GB 260 loader on my 4400, but it came with mounts. they are simple even if you had to build a set. as long as there are mid mount holes in your frame. If you could find a GB mounted close to you to use as a pattern, it could be done.
