Freshwater
New member
Need info on where to obtain top link attachment to allow a NH 451 mower to be mounted on an oliver 1650 taractor.
attaching New Holland 451 mower to Oliver 1650
- Thread starter Freshwater
- Start date
- Views: 2242
-
- Tags
- oliver 1650
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,143
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
You will probably have to fabricate the tractor end of the connection. Consult the mower's operator manual for hook up info, and extrapolate what is published in order to design and build the piece that will connect to your toplink "wishbone".
Edit, The guys here might be more help:
Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Board
Edit, The guys here might be more help:
Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Board
farmer2009
Elite Member
Welcome to the forum.
What do you mean? Does the tractor have a 3 point hitch or just a 2 point? Pictures?
I have a 451 so maybe I can get some pictures for you if I know just a little more.
What do you mean? Does the tractor have a 3 point hitch or just a 2 point? Pictures?
I have a 451 so maybe I can get some pictures for you if I know just a little more.
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,143
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
His Oliver has an unusual top link mount and the 451 part that needs to pin to a tractor's top link mount won't fit without modification.
farmer2009
Elite Member
I see. Not formilar with Oliver.
OP
Freshwater
New member
The oliver 1650 has 3 pt hitch- but the upper link point is on a yoke. I need to see how the top link of NH451 mower attaches- and how long upper arm can be. Thanks
farmer2009
Elite Member
Could you posts picture? I've been online but can't get a good picture of the rear of the tractor.
