B-7100 HST-D Fluid Capacity's
- Thread starter mrwitty_1
- Start date
- Views: 1017
DieselPower
Elite Member
- Joined
- Sep 30, 2006
- Messages
- 2,756
- Location
- Fairfield, PA
- Tractor
- JD 3020, JD 4230, JD 7410, JD 2440, MF 750, NH LS170
My Check-Chart manual shows the following:
Engine: 4.1 qts
Transmission, differential and hydraulic system: Gear Drive: 12.1 qts, Hydrostatic Drive: 14.3 qts.
Front differential: Gear Drive .7 qts Hydrostatic Drive: 1.6 qts
Bevel gear housing (each): Gear Drive: .2 qts Hydrostatic Drive: .5 qts
Engine: 4.1 qts
Transmission, differential and hydraulic system: Gear Drive: 12.1 qts, Hydrostatic Drive: 14.3 qts.
Front differential: Gear Drive .7 qts Hydrostatic Drive: 1.6 qts
Bevel gear housing (each): Gear Drive: .2 qts Hydrostatic Drive: .5 qts
Thanks Diesel,
I changed my oil today and added 4 qts to the crankcase and also a new filter. The strange thing is the dipstick still shows overfull, is there a trick to checking the oil ? the dipstick is bent to clear the muffler but is it suppose to be straight ? The good thing is I now know that it is at the proper level..
I changed my oil today and added 4 qts to the crankcase and also a new filter. The strange thing is the dipstick still shows overfull, is there a trick to checking the oil ? the dipstick is bent to clear the muffler but is it suppose to be straight ? The good thing is I now know that it is at the proper level..