B2320 Mulch Kit
- Thread starter mcrame01
- Start date
- Views: 3486
-
- Tags
- kubota b2320
BrianW is correct, at least for the BX2200 mulch kit. I bought it and it included mulching blades and a large steel plate that you bolt under your deck with about 10 5/16th bolts. That plate also blocks the discharge chute. At $250, I'd not buy it again.
For me, it did a nice job, but I needed to switch from full discharge to mulching, and it was just a PIA to change all the time. I built a metal plate to cover the opening, and just changed it out when I needed to mulch.
Worked fine; haven't had the mulch kit on since.
ron
For me, it did a nice job, but I needed to switch from full discharge to mulching, and it was just a PIA to change all the time. I built a metal plate to cover the opening, and just changed it out when I needed to mulch.
Worked fine; haven't had the mulch kit on since.
ron
mcrame01
I know what you mean about the snow. I don't intend to put the mowing deck back on until next May.
RonR
Did you leave the mulching blades on the deck and than "plugged" the discharge? Do you by any chance have any pictures of the plate?
I know what you mean about the snow. I don't intend to put the mowing deck back on until next May.
RonR
Did you leave the mulching blades on the deck and than "plugged" the discharge? Do you by any chance have any pictures of the plate?
Easygo,
I left the non-mulching blades on. I was mowing slowly (small area), so maybe it wouldn't be satisfactory if you had a lot to mow and wanted to go fast.
No pics of the plate (mower is stored now), but it was 1/8" plate that cover the discharge opening. Then welded two tabs on it to bolt to the deck.
ron
I left the non-mulching blades on. I was mowing slowly (small area), so maybe it wouldn't be satisfactory if you had a lot to mow and wanted to go fast.
No pics of the plate (mower is stored now), but it was 1/8" plate that cover the discharge opening. Then welded two tabs on it to bolt to the deck.
ron