B2920 HST first time using 3 point hitch

   / B2920 HST first time using 3 point hitch #1  

NoviceguyInCT

Bronze Member
Joined
Feb 8, 2006
Messages
84
Location
CT, Litchfield County
Tractor
BX24 TLB & old JD 400, JD H140
I sucessfully removed my backhoe. I recently installed my three point hitch. But for some reason the 3pt hitch goes up but won't go down. Any ideas ? Any help would be appreciated.

Jim
Connecticut
 
   / B2920 HST first time using 3 point hitch #2  
Not familiar with your particular tractor, but most have an adjustment for how fast the hitch drops. With no weight on it you might really need to open that valve so it drops.
 
   / B2920 HST first time using 3 point hitch #3  
Check your owner's manual for the location of the above mentioned valve. On the "L" series tractors it's a knob centered under the seat.
 
   / B2920 HST first time using 3 point hitch
  • Thread Starter
#4  
Unfortunately I can't turn the 3 pt. adjustment knob at all. Is there a reason I can't turn this knob??? It won't budge.
 
   / B2920 HST first time using 3 point hitch #5  
Can't turn in either direction?
 
   / B2920 HST first time using 3 point hitch #6  
If you put the 3pt lever all the way down, go back and manually push down on the hitch and see if it goes down
 
   / B2920 HST first time using 3 point hitch #7  
Obviously it's tightened in the full restricted position. How old is your tractor. If it's never used it could even be seized.
 

Tractor & Equipment Auctions

TAKEUCHI TL6R SKID STEER (A51246)
TAKEUCHI TL6R SKID...
1997 Freightliner FL60 Truck, VIN # 1FV3GJBC6VH725847 (A51572)
1997 Freightliner...
NEW Fork Extensions (A53002)
NEW Fork...
Tandem Axle Rear Truck Frame (A51692)
Tandem Axle Rear...
2016 HINO 268 26FT BOX TRUCK (A52141)
2016 HINO 268 26FT...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top