cowridermi
Bronze Member
- Joined
- Jan 20, 2012
- Messages
- 60
- Location
- Addison, NY
- Tractor
- MF 65, MF 1080, MF 1100, Kubuta B8200, Farmall 504, Farmall Cubs, Farmall Super A, Belarus 250AS's, Belarus 611, JD F935
Hi,
I ordered a block heater (70000 73274) for my B8200 and not sure where it should go. The instruction sheet is for a excavator but figured it would work in general anyway, no such luck. It shows a plug to be removed with a hex head but this block has only soft plugs. I called the dealer to verify that this is the right parts and they confirmed that it was and passed me to service. They said to pop out a plug and it would screw into the hole. I can't see how it will tread into the block. If someone had a photo of it installed or can tell me how they made out installing one would be great.
thanks
I ordered a block heater (70000 73274) for my B8200 and not sure where it should go. The instruction sheet is for a excavator but figured it would work in general anyway, no such luck. It shows a plug to be removed with a hex head but this block has only soft plugs. I called the dealer to verify that this is the right parts and they confirmed that it was and passed me to service. They said to pop out a plug and it would screw into the hole. I can't see how it will tread into the block. If someone had a photo of it installed or can tell me how they made out installing one would be great.
thanks
