Rowski
Veteran Member
- Joined
- May 18, 2000
- Messages
- 1,474
- Location
- North Central Vermont, Jay Peak Area
- Tractor
- 2004 New Holland TN70DA with 32LC loader, 2000 New Holland 2120 with Curtis cab, 7309 loader
George,
The rod must be removed to fold up the thumb. The pins have a collar on them with a 3/8 bolt and nut holding them on. With the two holes you can change the angle of the thumb. I like it best in the lower one. When the thumb is in storage you just need one pin in the uppper hole. I plan on making a mount or something (on the main part)to store the thumb rod.
I don't thing thay NH makes the hoe. There was a discussion (can't find it) that ta;lked about who makes it.
Sorry for the late post. Been really busy at work.
Derek
The rod must be removed to fold up the thumb. The pins have a collar on them with a 3/8 bolt and nut holding them on. With the two holes you can change the angle of the thumb. I like it best in the lower one. When the thumb is in storage you just need one pin in the uppper hole. I plan on making a mount or something (on the main part)to store the thumb rod.
I don't thing thay NH makes the hoe. There was a discussion (can't find it) that ta;lked about who makes it.
Sorry for the late post. Been really busy at work.
Derek