sharpvet03
New member
- Joined
- Sep 5, 2010
- Messages
- 5
I have a 3 point backhoe that is pto pump driven. The back hoe works great for a while and slowly losses power until the unit will not lift the boom any longer. All the other controls will work but with very limited power. I can take the line from the pump and place it in a bucket and seems to be be flowing about 5 gallons per minute at idle with no air bubbles in it.
The brand is TMI and only has about 5 hours on it but is about year old. I contacted the manufacturer and the said it sounds like the presure regulator. The sent me another one and I installed it and it is acting the exact same. Could the control valve be sucking air? Any ideas of what to try?
The brand is TMI and only has about 5 hours on it but is about year old. I contacted the manufacturer and the said it sounds like the presure regulator. The sent me another one and I installed it and it is acting the exact same. Could the control valve be sucking air? Any ideas of what to try?