Ballast Ballast Box Measurements

   / Ballast Box Measurements #1  

BamaJDfan

New member
Joined
Sep 19, 2008
Messages
24
Location
Huntsville, AL
Tractor
JD 2305
I am interested to hear from someone with a John Deere ballast box; what is the measurement between the 3 pt hitch top link hole and the draft arm pins?
 
   / Ballast Box Measurements #2  
15 inches - which is conveniently the I-Match/Quick hitch spec also.

I also have a Deere ballast box (p/n bw14313) that IS NOT quick hitch compliant, but the one they sell for the 2305 and up is the quick hitch comliant one (p/n BW15073).

Hope that helps,

Mike
 
   / Ballast Box Measurements
  • Thread Starter
#4  
Thanks alot guys - I really appreciate the help for this first time tractor owner. I almost made a mistake and bought one with an 18" measurement. I want the one with the same measurement as the iMatch because someday when I collect enough toys, er - I mean "tools" - I will want an iMatch to work with them.:eek:
 

Tractor & Equipment Auctions

2020 John Deere 6110M 110HP 4WD Agricultural Tractor (A49461)
2020 John Deere...
2020 Mesa Ridge 32ft Lite Travel Trailer (A49461)
2020 Mesa Ridge...
2015 Hamm H7i VR-3 Single Drum Vibratory Soil Compactor (A49346)
2015 Hamm H7i VR-3...
2019 GENIE Z-45/25XC V2 TELESCOPIC MANLIFT (A51242)
2019 GENIE...
2010 TROXELL 140BBL TRI AXLE VACUUM TRAILER (A50854)
2010 TROXELL...
CATERPILLAR 304E CR EXCAVATOR (A51242)
CATERPILLAR 304E...
 
Top