I work for a BCS dealership and have a customer interested in the BCS739 with the chipper/shredder. He is concerned about the caster on rough ground and if they will hold up constant abuse. I have not sold this attachment so I have no real world insight. Any help?
BCS CHipper/Shredder
- Thread starter Sven32
- Start date
- Views: 8649
farmerboybill
Platinum Member
- Joined
- Mar 4, 2008
- Messages
- 782
- Location
- Southwestern Wisconsin
- Tractor
- BCS 850 diesel and 735 diesel
nothing holds up to ABUSE.....
farmerboybill
Platinum Member
- Joined
- Mar 4, 2008
- Messages
- 782
- Location
- Southwestern Wisconsin
- Tractor
- BCS 850 diesel and 735 diesel
I'm going to assume you are talking about the BIO-100?
I had a BIO-100 chipper for a couple years. It was a pain to move around because it wasn't stable on the narrow track width. The narrow hard plastic wheels will sink in soft ground, too. I got around these problems to a small degree by pulling the chipper to where I wanted to go - walking backward and guiding the machine in reverse. Earth Tools offers a wider bar to mount the tires further out from the frame. I don't see it on their website. I've never used one, but assume that it would make the chipper more stable over rough terrain.
Personally, I just don't care for the BIO-100. It doesn't really live up to its claims. I now have a BIO-90, and it's a very good unit, though still unstable when traveling over rough terrain. I plan on putting wider casters on it very soon.
I had a BIO-100 chipper for a couple years. It was a pain to move around because it wasn't stable on the narrow track width. The narrow hard plastic wheels will sink in soft ground, too. I got around these problems to a small degree by pulling the chipper to where I wanted to go - walking backward and guiding the machine in reverse. Earth Tools offers a wider bar to mount the tires further out from the frame. I don't see it on their website. I've never used one, but assume that it would make the chipper more stable over rough terrain.
Personally, I just don't care for the BIO-100. It doesn't really live up to its claims. I now have a BIO-90, and it's a very good unit, though still unstable when traveling over rough terrain. I plan on putting wider casters on it very soon.
farmerboybill
Platinum Member
- Joined
- Mar 4, 2008
- Messages
- 782
- Location
- Southwestern Wisconsin
- Tractor
- BCS 850 diesel and 735 diesel
I went on BCSAmerica's website, and it looks like Del Morino (or whoever BCS has contracted to build B-100 chippers this week) did make the wheels out further than the Caravaggi BIO-100 I had. It should follow the ground a little better than mine did. Still, the 3" limb capacity is a gross overestimation. It'll chip broomsticks with ease, but put a little bend or a fork in the branch you're chipping, and you'll find out the machine's limitation - you can't get the material to the blade.