I'm in the process of making up a small boom spray unit for my Jinma 204. I'm using an old 3PL carryall on which I've fixed a tank, 12v pump, and a small 4 nozzle boom. I just have to wire up a switch on the dash to give me control over the pump and a socket at the rear of the tractor to plug in the 12v.
I'd like to be able to switch the boom over for a blanket wiper when needed and use the same pump and tank. Has anyone done anything like this. I got some ideas from www.agric.wa.gov.au/pls/portal30/ docs/FOLDER/IKMP/PW/WEED/WC/F09096.pdf
but would appreciate any design advice, particularly in terms of regulating the flow onto the blanket surface.
Thanks
Mark
I'd like to be able to switch the boom over for a blanket wiper when needed and use the same pump and tank. Has anyone done anything like this. I got some ideas from www.agric.wa.gov.au/pls/portal30/ docs/FOLDER/IKMP/PW/WEED/WC/F09096.pdf
but would appreciate any design advice, particularly in terms of regulating the flow onto the blanket surface.
Thanks
Mark