Blessed beyong measure

   / Blessed beyong measure #1  

wroughtn_harv

Super Member
Joined
May 12, 2002
Messages
6,000
Location
Denison, Texas
Tractor
2013 Volvo MC85C
Some here might have remembered last November I came up with an idea of using plastic trash to build homes, not just houses, homes. I haven't been here or any place else much because it has an energy and time consuming adventure.

I can't claim credit for the success we are experiencing because so many others have contributed.

A couple of weeks ago I was invited to a meeting with the principals of the Hunt Institute on the SMU campus. I left there with an invitation to build a home on their campus for an event that will happen next month. For us this is like being invited to demonstrate and display a new kind of car at the Detroit Auto Show. And you don't even have one put together yet.

It seems like everyday something new happens that is more exciting that what happened yesterday. My friends here who were at the ATV bridge build at my old shop, this makes that look like a nap.

Probably the most wonderful thing that could happen in my life happened this past weekend. My grandsons, twenty four and twenty years old, came down from OKC to see the recycled plastic block first hand. My wife told me all week that she was worried about them being disappointed because they seemed so high on the idea over the phone and on the internet.

They arrived Saturday afternoon. They kept this old man up until 1:00 in the morning talking about the blocks. I have been struggling from day one for a good name for the blocks. It took them along with their older sister about thirty minutes. We had three laptops smoking my wifi as they brainstormed.

Ubuntu-blox. Ubuntu is an African term that refers to the community of man. Many people have defined it. One of the definitions is about the community of man and environment.

We already have stuff planned involving college kids here in the Dallas area. Now we have stuff planned in OKC. We have a wedding to attend this Saturday evening in OKC. I told the boys that I would bring up the prototype machine and they could use it to demonstrate and make blocks for the SMU house if they wanted.

It is amazing what they have accomplished in just a couple of days. Today they called me to tell me about getting an appointment with someone pretty important at the OU civil engineering school. They walked in with a couple of the blocks and the next thing they knew they had the appointment. Everyone they talked to got excited about it. The same thing happened at their high school. The teachers were almost instantly as excited about as the boys are.

I don't doubt the reactions they got. How would you feel if you had two young men approach you if you were a teacher and them on fire with enthusiasm about saving the world? When was the last time you talked to a college age kid with a passion for doing something for the world?

They are not unusual for college kids today. The vast majority of them are wanting to do something for the planet and people. There just aren't any ideas out there for them to grab and make their own. The reason we got the invite from the Hunt Institute is the principal there believes in the college kids today and wants to help them find that idea that can channel their energy in a positive way.

My wife told me yesterday that we were the luckiest grandparents in the whole world because our grandsons were high and there were no drugs involved.

Yesterday a friend who has supported me from early on with this called. I asked him what would be the best thing that could happen to the blocks.

"Someone with power and funds adopt it and take it global?" he asked.

I said, "no. Better than that?"

"What would that be?"

"A whole bunch of little people take over and make it their own."

That is literally what is happening. If you are on fb look us up ubuntu-blox. If you are in the Norman area pm me and I will give you the address where the demonstraion and block building is going to happen. It will be about one pm Saturday afternoon.

You can click on my signature (life is good) and go to my web page which has a link to the recycled plastic block houses web page.

I feel I am blessed beyond measure. We are lucky when we have an idea we can believe in. But we are luckiest of all when we have an idea that our grandkids can believe in.
 
   / Blessed beyong measure #2  
Go Harvey!!!

Good for you!!!

It sounds like your Grandchildren are a "chip off the old block".......
 
   / Blessed beyong measure #3  
Harvey, you come up with more new ideas than anyone I know. Good luck with this latest venture.
 
   / Blessed beyong measure #4  
Harvey, you are sure making this go. To have your grandsons helping is going to be a big plus. Indeed! You are a blessed person.

Just an idea. . . What about going to Best Buy stores where they unpack a lot of appliances and electronics? They should have a lot of styrofoam available there. Also, it's really too bad you didn't think of this before Christmas. You might have gone to Wiley HS and asked them to sponsor a "bring styrofoam to school day" right after the holidays when people were loading their curbsides with all the styrofoam packed around stuff under the tree. Heck, that might be a good thing to do anyhow. Put some of those big cardboard boxes as collection sites at the schools and have kids bring in styrofoam to recycle.:2cents:
 
   / Blessed beyong measure #6  
Harvey... Hopefully this thing will go global and you will get the Noble Prize. Seriously!

There are lots of milestones in history... and I guess history makes the milestones too.
I just checked it out on FB: https://www.facebook.com/home.php?sk=group_187871164581331

Some times the "simple" solution is the obvious one but is also the hardest to achieve. Like I tell a lot of my clients: "you pay me to get to a "simple" solution - "less is more!"

This is very exciting... and is needed not only in Africa but a lot of industrialized countries too.

Thanks for looking at the bigger picture!

Lloyd
 
   / Blessed beyong measure #7  
I agree. You've got the right people involved now and to have them be your grandsons is very special. They must be very proud of you too. Thanks for sharing this great story.
 
   / Blessed beyong measure
  • Thread Starter
#9  
It's been open source from moment one.

I have patents, two were awarded last year. I am very familiar with them.

Intellectual property protection adds years to the introduction and limits the concept to one mind. I see this as a moment in time event.

Monday morning my two grandkids arrived here in Texas and we have been knocking ourselves out trying to get enough blocks made to make our commitment to the Hunt Institute. The boys got a commitment from OU's structural engineering lab to do their stress tests on a wall the and the blocks. Gratis, for free. The man in charge took one look at a sample block and wanted to do it because he liked it so much.

If OU does their thing in a timely manner we could be looking at having structural engineering data within six months of concept. That's usually about a minimum of two years and tens of thousands of dollars.
 
   / Blessed beyong measure
  • Thread Starter
#10  
Harvey... Hopefully this thing will go global and you will get the Noble Prize. Seriously!

There are lots of milestones in history... and I guess history makes the milestones too.
I just checked it out on FB: https://www.facebook.com/home.php?sk=group_187871164581331

Some times the "simple" solution is the obvious one but is also the hardest to achieve. Like I tell a lot of my clients: "you pay me to get to a "simple" solution - "less is more!"

This is very exciting... and is needed not only in Africa but a lot of industrialized countries too.

Thanks for looking at the bigger picture!

Lloyd

Lloyd, we have a solution that you will love. One of our problems was the difficulty in straightening out the wire as it comes off of a coil. Manually doing it was tough. It took grip and strength to straighten it out prior to use and it had to be straightened to use. I was the only one who could do it for any length of time.

I cut the wire to length. What I had was three fourths of a coil about thirty inches in diameter. I finally stopped and looked at what I was doing with my hands to straighten it out. We have a tool we designed to form the eyes or loops in the wire. It is made with three quarter inch solid rod. I made a new loop forming tool from five eighths round tubing. The cross piece for gripping to make the loop is now the wire straightener tool. Instead of gripping the wire with two hands and taking out the curve I now slide the wire through the handle of the loop forming tool and gently remove the curvature of the wire.

It's so simple, so effective, and we added no additional inventory to the package.
 

Tractor & Equipment Auctions

2014 Doosan DA30 (A51039)
2014 Doosan DA30...
4- 6 DRILL COLLARS (A50854)
4- 6 DRILL COLLARS...
2020 MACK PINNACLE (INOPERABLE) (A50854)
2020 MACK PINNACLE...
2012 Geringhoff NS1200 Corn Head (A50657)
2012 Geringhoff...
1989 Freightliner FLD120 (NEW CAT 3406A, NEW REAR ENDS, CLUTCH) (A51039)
1989 Freightliner...
4- 6 DRILL COLLARS (A50854)
4- 6 DRILL COLLARS...
 
Top