1gr8bldr
Silver Member
- Joined
- Mar 28, 2013
- Messages
- 163
- Location
- carolina's
- Tractor
- Fordson Super Dexta and S250Turbo Bobcat
Help my think this through. I assumed I wanted a hydraulic angle. Do I need this? They are hard to come by used. My thoughts were that if I wind rowed my debris to my right and went the length of my run, I should turn around, change the angle and continue wind rowing that same debris, and then turn around again...... Doing this will cause me to tear up the ground a little, turning, which can be fixed... so I got to thinking, maybe the better thing to do is to back up the entire length and go again, angled, windrowing to the right. So, which is best. I also wondered how hard it would be to convert a manual angle to a hydraulic angle. Should not take much. But if backing up is best, then I do not have to have a hydraulic angle.