Bolt on tooth bar?
- Thread starter sarge rmb
- Start date
- Views: 5336
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 29,784
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
Many here at TBN have Markham Tooth-bars on their BX's... I've had one for a while and just got around to putting it one last month...
Just search Markham and you will see a lot of posts...
Just search Markham and you will see a lot of posts...
smallfarmer
Bronze Member
- Joined
- Mar 20, 2008
- Messages
- 64
- Tractor
- Kubot BX2350
I put a WR Long wear blade on mine. Either will fit nicely
tommu56
Elite Member
I have a ATI it works great
The only thing I regret was I drilled my holes in the back of slot (told to do it by dealer)
and I cant flip it in to bucket sooner or later I weld it up and drill them in the front.
tommu
The only thing I regret was I drilled my holes in the back of slot (told to do it by dealer)
and I cant flip it in to bucket sooner or later I weld it up and drill them in the front.
tommu
Pictures of Markham and others are on the Tooth Bar page of the BX Wiki
rbcsaver
Silver Member
I have a Markham and couldn't be more pleased with the order process, prompt delivery and bar itself.
regards,
Steve
regards,
Steve
Renob
Gold Member
rbcsaver said:
I will second RBCSAVER. Markham is top notch!
NuBota
Gold Member
Markham is very popular here, but I still tout the WR Long FTB. Not because it's better quality than the others - can't speak to that - but because it's "flat". Back dragging with the bucket leaves a smooth finish - no grooves from the teeth - and the flat bar being under the bucket
Tooth Bars TB, STB, and ITB
I abuse mine and it has stood up fine. Based on posts here quality seems at least equal to the other brands.
Only potential downside is that you can't order direct - need to see your dealer...
Tooth Bars TB, STB, and ITB
I abuse mine and it has stood up fine. Based on posts here quality seems at least equal to the other brands.
Only potential downside is that you can't order direct - need to see your dealer...
Riptide23
Silver Member
tommu56 said:
Yeah, I didn't think of that either when I installed my Markham bar. It didn't come with any directions, so I didn't think of that before I started drilling.
My toothbar is plenty stout enough, but I had to grind the snot out of mine to get it to fit inside my BX23 bucket. Double check with Markham with your measurements to ensure it's gonna fit right out of the box...
